Vertical Retraction System

  • Speed: up to 1 m/s
  • Power requirements: 2 kW, single-phase, 220V, 50 Hz.
  • Maximum height: 15 m
  • Used: with all gravity trolleys

Vertical retraction system (VRS) transports the trolley vertically from the ending to the starting platform of the ride. VRS features a steel rope winch at the top station, to which a movable track segment is attached. The segment is guided on a set of rails to eliminate swings and twists on the way upward.

Features

  • Automatic stop at both platforms
  • Integrated with ride control system
  • Non-return elements on the track and segment prevent trolleys slipping off the track ends or the movable segment.

Advantages

  • Low footprint – ideal for rides with start and end platform close one to another
  • Faster operation and less staff required
  • Trolleys are quickly loaded and unloaded from the movable segment

Suitable for:

Panoramic Rollglider

Extreme Rollglider

Rope retraction system

  • Speed: up to 1.5 m/s
  • Power requirements: 1.5 kW, 3-phase, 380 V, 50 Hz as standard
  • Maximum inclination: 30?
  • Used: with all gravity trolleys

The rope retraction system can be used both for transporting trolleys and people from the ending to the starting platform of the ride. The system features a steel wire cable running close to the return track of the ride, driven by an electrical motor.

Features

  • Automatic stop at both ride platforms
  • Integrated with ride control system

Advantages

  • Allows large distance between start and end stations.
  • Eases operation and lowers the staff needed

Suitable for:

Panoramic Rollglider

Extreme Rollglider

Chain Retraction system

  • Speed: up to 1 m/s
  • Power requirements: 3.5 kW, three-phase, 380V, 50 Hz as standard
  • Maximum inclination: 30?
  • Maximum length: 30m
  • Used: with all gravity trolleys
  • Installed: only on straight track segments

The chain retraction system enables lifting participants together with the trolley to the start of the ride without the need for a second platform. Trolleys are equipped with special attachments which mesh with the chain and its motion upwards pulls the trolley to the top of the ride, where they detach automatically from the chain and start the ride.

Advantages

  • No need for a second platform at the top of the ride; may be a substantial cost benefit for many rides
  • Trolleys attach to and detach from the chain automatically without operator intervention; saves operational time.
  • Chain system activates and deactivates automatically as needed

Suitable for:

Panoramic Rollglider

Extreme Rollglider

    Get in touch

    Do you have a project in mind?

    Head Office
    Tsarigradsko shose 111V, Sofia, Bulgaria
    [email protected]

    Borislav Atanasov
    Head of Sales
    [email protected]